Empress Effects Phaser User Manual download pdf (Page 19)

MIDI Control

The Empress Phaser allows all of its digital parameters to be

controlled via MIDI control change messages, and to have its tempo

changed with MIDI clock messages. To use MIDI with your phaser

you’ll have to:

1. Attach the Empress Midibox using a ¼” patch cable to the

control port. This is a simple device which converts the

signal on a standard MIDI cable to a ¼” cable you can plug

into your phasers control port. (Not included with the

phaser)

2. Configure the pedal for MIDI control by setting the internal

control port dip switches to the MIDI mode.

3. Configure the unit’s MIDI channel by setting the internal dip

switches labelled ‘MIDI CH’. Select a channel that won’t

conflict with the other devices in your MIDI rig.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Empress Effects Phaser User Manual Page 19